Problem: diff: using diff anchors with hidden buffers fails silently
Solution: Give specific error message for diff anchors when using hidden
buffers (Yee Cheng Chin).
Diff anchors currently will fail to parse if a buffer used for diff'ing
is hidden. Previously it would just fail as the code assumes it would
not happen normally, but this is actually possible to do if `closeoff`
and `hideoff` are not set in diffopt. Git's default diff tool "vimdiff3"
also takes advantage of this.
This fix this properly would require the `{address}` parser to be
smarter about whether a particular address relies on window position or
not (e.g. the `'.` address requires an active window, but `'a` or `1234`
do not). Since hidden diff buffers seem relatively niche, just provide a
better error message / documentation for now. This could be improved
later if there's a demand for it.
related: #17615closes: #17904
Signed-off-by: Yee Cheng Chin <ychin.git@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
The '?' needs to be escaped, because the autocommand is using
file-patterns (glob like) and not a regex). See :h file-pattern
closes: #17890
Signed-off-by: Girish Palya <girishji@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: cannot perform autocompletion
Solution: Add the 'autocomplete' option value
(Girish Palya)
This change introduces the 'autocomplete' ('ac') boolean option to
enable automatic popup menu completion during insert mode. When enabled,
Vim shows a completion menu as you type, similar to pressing |i\_CTRL-N|
manually. The items are collected from sources defined in the
'complete' option.
To ensure responsiveness, this feature uses a time-sliced strategy:
- Sources earlier in the 'complete' list are given more time.
- If a source exceeds its allocated timeout, it is interrupted.
- The next source is then started with a reduced timeout (exponentially
decayed).
- A small minimum ensures every source still gets a brief chance to
contribute.
The feature is fully compatible with other |i_CTRL-X| completion modes,
which can temporarily suspend automatic completion when triggered.
See :help 'autocomplete' and :help ins-autocompletion for more details.
To try it out, use :set ac
You should see a popup menu appear automatically with suggestions. This
works seamlessly across:
- Large files (multi-gigabyte size)
- Massive codebases (:argadd thousands of .c or .h files)
- Large dictionaries via the `k` option
- Slow or blocking LSP servers or user-defined 'completefunc'
Despite potential slowness in sources, the menu remains fast,
responsive, and useful.
Compatibility: This mode is fully compatible with existing completion
methods. You can still invoke any CTRL-X based completion (e.g.,
CTRL-X CTRL-F for filenames) at any time (CTRL-X temporarily
suspends 'autocomplete'). To specifically use i_CTRL-N, dismiss the
current popup by pressing CTRL-E first.
---
How it works
To keep completion snappy under all conditions, autocompletion uses a
decaying time-sliced algorithm:
- Starts with an initial timeout (80ms).
- If a source does not complete within the timeout, it's interrupted and
the timeout is halved for the next source.
- This continues recursively until a minimum timeout (5ms) is reached.
- All sources are given a chance, but slower ones are de-prioritized
quickly.
Most of the time, matches are computed well within the initial window.
---
Implementation details
- Completion logic is mostly triggered in `edit.c` and handled in
insexpand.c.
- Uses existing inc_compl_check_keys() mechanism, so no new polling
hooks are needed.
- The completion system already checks for user input periodically; it
now also checks for timer expiry.
---
Design notes
- The menu doesn't continuously update after it's shown to prevent
visual distraction (due to resizing) and ensure the internal list
stays synchronized with the displayed menu.
- The 'complete' option determines priority—sources listed earlier get
more time.
- The exponential time-decay mechanism prevents indefinite collection,
contributing to low CPU usage and a minimal memory footprint.
- Timeout values are intentionally not configurable—this system is
optimized to "just work" out of the box. If autocompletion feels slow,
it typically indicates a deeper performance bottleneck (e.g., a slow
custom function not using `complete_check()`) rather than a
configuration issue.
---
Performance
Based on testing, the total roundtrip time for completion is generally
under 200ms. For common usage, it often responds in under 50ms on an
average laptop, which falls within the "feels instantaneous" category
(sub-100ms) for perceived user experience.
| Upper Bound (ms) | Perceived UX
|----------------- |-------------
| <100 ms | Excellent; instantaneous
| <200 ms | Good; snappy
| >300 ms | Noticeable lag
| >500 ms | Sluggish/Broken
---
Why this belongs in core:
- Minimal and focused implementation, tightly integrated with existing
Insert-mode completion logic.
- Zero reliance on autocommands and external scripting.
- Makes full use of Vim’s highly composable 'complete' infrastructure
while avoiding the complexity of plugin-based solutions.
- Gives users C native autocompletion with excellent responsiveness and
no configuration overhead.
- Adds a key UX functionality in a simple, performant, and Vim-like way.
closes: #17812
Signed-off-by: Girish Palya <girishji@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
This change includes the following upstream commits:
- fix: remove black lines in directory listing
- fix: correctly create new file when using Lexplore
- refactor: remove print functionality
The main highlight is removing print functionality that was broken both
in neovim and vim.
closes: #17847
Signed-off-by: Luca Saccarola <github.e41mv@aleeas.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: can define an enum/interface in a function
(lacygoill)
Solution: Give an error when defining an enum or an interface inside a
function (Yegappan Lakshmanan)
fixes: #17835fixes: #17837closes: #17837
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Wayland: gvim still needs GVIM_ENABLE_WAYLAND
Solution: Drop the GVIM_ENABLE_WAYLAND code, always enable both X11 and
Wayland GUI support (Christoffer Aasted)
closes: #17817
Signed-off-by: Christoffer Aasted <chr.aasted@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: no generic support yet
Solution: Add support for generic functions, funcrefs and object/class
methods (Yegappan Lakshmanan).
closes: #17313
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: cannot easily trigger wildcard expansion
Solution: Introduce wildtrigger() function
(Girish Palya)
This PR introduces a new `wildtrigger()` function.
See `:h wildtrigger()`
`wildtrigger()` behaves like pressing the `wildchar,` but provides a
more refined and controlled completion experience:
- Suppresses beeps when no matches are found.
- Avoids displaying irrelevant completions (like full command lists)
when the prefix is insufficient or doesn't match.
- Skips completion if the typeahead buffer has pending input or if a
wildmenu is already active.
- Does not print "..." before completion.
This is an improvement on the `feedkeys()` based autocompletion script
given in #16759.
closes: #17806
Signed-off-by: Girish Palya <girishji@gmail.com>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
- Match :autocmd options and special buffer pattern.
- Normalise ellipsis (three dots) in Ex command argument lists.
closes: #17793
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: close button "X" is visible in the non-GUI 'tabline', even
when the mouse is disabled
Solution: only show the button when 'mouse' contains any of the flags
"anvi" (Girish Palya)
The tabline always displays an "X" (close) button, and the info popup
shows both a close button and a resize handle—even when the mouse is
disabled. These UI elements are only actionable with the mouse and serve
no purpose for keyboard users who disable the mouse. Displaying
non-functional, clickable elements in a non-GUI environment is
misleading and adds unnecessary visual clutter.
So remove the close button and resize handle when the mouse is disabled.
They appear again when mouse is enabled.
closes: #17765
Signed-off-by: Girish Palya <girishji@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: not possible to anchor specific lines in difff mode
Solution: Add support for the anchoring lines in diff mode using the
'diffanchor' option (Yee Cheng Chin).
Adds support for anchoring specific lines to each other while viewing a
diff. While lines are anchored, they are guaranteed to be aligned to
each other in a diff view, allowing the user to control and inform the
diff algorithm what the desired alignment is. Internally, this is done
by splitting up the buffer at each anchor and run the diff algorithm on
each split section separately, and then merge the results back for a
logically consistent diff result.
To do this, add a new "diffanchors" option that takes a list of
`{address}`, and a new "diffopt" option value "anchor". Each address
specified will be an anchor, and the user can choose to use any type of
address, including marks, line numbers, or pattern search. Anchors are
sorted by line number in each file, and it's possible to have multiple
anchors on the same line (this is useful when doing multi-buffer diff).
Update documentation to provide examples.
This is similar to Git diff's `--anchored` flag. Other diff tools like
Meld/Araxis Merge also have similar features (called "synchronization
points" or "synchronization links"). We are not using Git/Xdiff's
`--anchored` implementation here because it has a very limited API
(it requires usage of the Patience algorithm, and can only anchor
unique lines that are the same across both files).
Because the user could anchor anywhere, diff anchors could result in
adjacent diff blocks (one block is directly touching another without a
gap), if there is a change right above the anchor point. We don't want
to merge these diff blocks because we want to line up the change at the
anchor. Adjacent diff blocks were first allowed when linematch was
added, but the existing code had a lot of branched paths where
line-matched diff blocks were handled differently. As a part of this
change, refactor them to have a more unified code path that is
generalized enough to handle adjacent diff blocks correctly and without
needing to carve in exceptions all over the place.
closes: #17615
Signed-off-by: Yee Cheng Chin <ychin.git@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: [security]: path traversal issue in tar.vim
(@ax)
Solution: warn the user for such things, drop leading /, don't
forcefully overwrite files when writing temporary files,
refactor autoload/tar.vim
tar.vim: drop leading / in path names
A tar archive containing files with leading `/` may cause confusions as
to where the content is extracted. Let's make sure we drop the leading
`/` and use a relative path instead.
Also while at it, had to refactor it quite a bit and increase the
minimum supported Vim version to v9. Also add a test for some basic tar
functionality
closes: #17733
Problem: [security]: path traversal issue in zip.vim (@ax)
Solution: drop leading ../ on write of zipfiles, don't forcefully
overwrite existing files
A zip plugin which contains filenames with leading '../' may cause
confusion as to where the content will be extracted. Let's drop such
things and make sure we use a relative filename instead and don't
forcefully overwrite temporary files. Also, warn the user of such
things.
related: #17733
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: defaults: 'showcmd' is not enabled in non-compatible mode on
Unix
Solution: Always enable 'showcmd' in non-compatible mode, drop it from
defaults.vim.
'showcmd' was already always enabled in Vim compatible mode except for
UNIX environments. So let's just enable it always, there is no good
reason why UNIX platforms should be handled differently than other
platforms, especially since `defaults.vim` did enable this option
anyhow.
closes: #17739
Signed-off-by: Christian Brabandt <cb@256bit.org>
- Take over as file maintainer.
- Improve highlighting of legacy script examples by using :syn-iskeyword
with the default 'iskeyword' value. Vim9 script examples are not
supported yet.
- Match admonition labels in more contexts.
- Match URLs in more contexts.
fixes#17721closes: #17731
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: tests: string options in gen_opt_test.vim aren't fully sorted.
Solution: Sort the string options alphabetically. Also make description
of 'maxsearchcount' start with lower-case for consistency with
other options, update documentation for searchcount().
closes: #17720
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: The maximum search count uses a hard-coded value of 99
(Andres Monge, Joschua Kesper)
Solution: Make it configurable using the 'maxsearchcount' option.
related: #8855fixes: #17527closes: #17695
Signed-off-by: Christian Brabandt <cb@256bit.org>
