Added ogg and addon support for Symbian.

git-svn-id: svn://svn.code.sf.net/p/sc2/code/trunk@3096 8092fc87-c524-0410-9efc-e669fe64eaf9

sc2/INSTALL.symbian

@@ -6,12 +6,11 @@ unclear. If you encounter any problems or have suggestions how to improve this
 document, please report them to our Bugzilla at
    http://bugs.uqm.stack.nl/
    
-UQM's Symbian support is currently at experimental stage and is tested only on
-Nokia N73, which has too little memory to run it reliably for long time.
-Reports of successes and failures on other devices are very welcome.
+UQM's Symbian support is currently at experimental stage. Development is
+being done on Nokia N73, which has too little memory for longer playing
+sessions. Reports of successes and failures on other devices are very welcome.
 
 Known problems:
-- No OGG support so voices and 3DO music are not available.
 - No netmelee.
 
 
@@ -41,6 +40,9 @@ Prerequisites:
   * Download from http://koti.mbnet.fi/mertama/sdl.html
   * You also need the sources from http://www.libsdl.org/
   
+- Tremor
+  * Check out from SVN repository at http://svn.xiph.org/trunk/Tremor/
+
 Building:
 ---------
 
@@ -51,7 +53,7 @@ Building:
 2) Subst your Symbian SDK to a new drive along the following example:
       subst z: C:\Symbian\9.1\S60_3rd_MR_2
       
-3) Put UQM sources inside the substed drive, if not already there.
+3) Put UQM sources and Tremor inside the substed drive, if not already there.
 
 4) Install and build SDL, instructions are inside the package.
 
@@ -61,9 +63,16 @@ Building:
       bldmake bldfiles
       abld build
       
-6) Open MSYS terminal. All following steps are done inside it.
+6) Build Tremor. First apply a patch found from UQM SVN repository
+   at trunk/symbian/tremor:
+      cd Tremor
+      patch -p0 </path/to/tremor_symbian.patch
+      bldmake bldfiles
+      abld build
 
-7) Two environment variables control the building, BUILD_EPOCROOT and BUILD_HOST.
+7) Open MSYS terminal. All following steps are done inside it.
+
+8) Two environment variables control the building, BUILD_EPOCROOT and BUILD_HOST.
    
    Set BUILD_EPOCROOT to point to the substed drive:
       export BUILD_EPOCROOT=/z
@@ -72,14 +81,14 @@ Building:
    for which target you want to build:
       export BUILD_HOST=GCCE
 
-8) Compile (you don't need to change any options from the interactive menu):
+9) Compile (you don't need to change any options from the interactive menu):
       ./build.sh uqm
 
-9) Install. It builds the content zip and puts everything to proper
-   place (WINSCW) or creates a self-signed SIS package (GCCE / ARMV5):
-      ./build.sh uqm install
+10) Install. It builds the content zip and puts everything to proper
+    place (WINSCW) or creates a self-signed SIS package (GCCE / ARMV5):
+       ./build.sh uqm install
       
-10) If you built for GCCE or ARMV5, you should now have uqm.sisx in the same
+11) If you built for GCCE or ARMV5, you should now have uqm.sisx in the same
     directory from where you did the build. Remember to also install SDL SIS
     package and if device does not support FP2, Open C plugins before
     attempting to run UQM on actual device.

sc2/build/unix/config_proginfo_host

@@ -219,7 +219,7 @@ case "$HOST_SYSTEM" in
 		LIB_tremor_LDFLAGS="-framework Tremor"
 		;;		
 	ARMV5|WINSCW|GCCE)
-		LIB_tremor_DETECT="false"
+		LIB_tremor_DETECT="true"
 		;;
 	*)
 		LIB_tremor_CFLAGS=""

sc2/src/symbian/uqm.cfg

@@ -3,7 +3,7 @@ config.alwaysgl = no
 config.sfxvol = 20
 config.iconicscan = no
 config.pulseshield = no
-config.3domusic = no
+config.3domusic = yes
 config.smoothmelee = no
 config.positionalsfx = no
 config.resheight = 240
@@ -20,7 +20,7 @@ config.subtitles = yes
 config.3domovies = yes
 config.scanlines = no
 config.showfps = no
-config.speechvol = 0
+config.speechvol = 20
 config.remixmusic = no
 config.smoothscroll = no
 config.audioquality = low

sc2/src/symbian/uqm.mmp

@@ -33,6 +33,7 @@ LIBRARY eikcore.lib
 LIBRARY ws32.lib
 LIBRARY bafl.lib
 LIBRARY euser.lib
+LIBRARY efsrv.lib
 LIBRARY sdl.lib
 LIBRARY libc.lib
 LIBRARY libm.lib
@@ -41,3 +42,4 @@ LIBRARY libpthread.lib
 
 STATICLIBRARY uqm.lib
 STATICLIBRARY SDL_image.lib
+STATICLIBRARY tremor.lib

sc2/src/symbian/uqmapp.cpp

@@ -6,6 +6,7 @@
 #include <aknnotewrappers.h>
 #include <eikstart.h>
 #include <badesca.h>
+#include <bautils.h>
 #include <stdio.h>
 #include <stdlib.h>
 #include <SDL/SDL_keysym.h>
@@ -84,6 +85,7 @@ private:
     void DoExit(TInt aErr);
     void HandleWsEventL(const TWsEvent& aEvent, CCoeControl* aDestination);
     void HandleResourceChangeL(TInt aType);
+    void AddCmdLineParamsL(CDesC8Array& aArgs);
 private:
     CExitWait* iWait;
     CSDLWin* iSDLWin;
@@ -164,7 +166,9 @@ void CSdlAppUi::ConstructL()
     
     iWait = new (ELeave) CExitWait(*this);    
     CDesC8ArrayFlat* args = new (ELeave)CDesC8ArrayFlat(10);
-    iSdl->CallMainL(iWait->iStatus, *args, CSDL::ENoParamFlags, 81920);
+    AddCmdLineParamsL(*args);
+    
+    iSdl->CallMainL(iWait->iStatus, *args, CSDL::ENoFlags, 81920);
     delete args;
     
     iWait->Start();     
@@ -218,6 +222,28 @@ void CSdlAppUi::HandleResourceChangeL(TInt aType)
         }
     }
 
+void CSdlAppUi::AddCmdLineParamsL(CDesC8Array& aArgs)
+    {       
+    _LIT8(KAddonParam, "--addondir=?:\\uqm-addons");
+    _LIT16(KTestFolder, "?:\\uqm-addons");
+    RFs fs;
+    
+    fs.Connect();   
+    for (TInt8 c = 'e'; c < 'z'; ++c)
+        {
+        TBuf16<32> buf(KTestFolder);
+        buf[0] = c;
+        if (BaflUtils::FolderExists(fs, buf))
+            {
+            TBuf8<32> arg(KAddonParam);
+            arg[11] = c;
+            aArgs.AppendL(arg);
+            break;
+            }
+        }
+    fs.Close();
+    }
+
 CSdlAppUi::~CSdlAppUi()
     {
     if(iWait != NULL)