Problem: Generating prototype files does not work on all platforms
Solution: Rework prototypes generation using python instead of cproto,
enable it in CI to test it for each PR (Hirohito Higashi).
closes: #18045
Signed-off-by: Hirohito Higashi <h.east.727@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: tabpanel: tabpanel vanishes with popup menu
Solution: remove pum-related test in tabpanel_leftcol(), refactor a few
related functions (Hirohito Higashi)
This commit does the following:
- Delete unnecessary pum-related checks in the tabpanel_leftcol()
function
- remove pum-related check in tabpanel_leftcol()
- The argument of the TPL_LCOL() macro has been deleted.
- The argument of the tabpanel_leftcol() function has been changed
to void
- The return type of the `win_comp_pos()` function has been changed to
void
closes: #17549
Signed-off-by: Hirohito Higashi <h.east.727@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: It is difficult to ignore all but some events.
Solution: Add support for a "-" prefix syntax in '(win)eventignore' that
subtracts an event from the ignored set if present
(Luuk van Baal).
closes: #17392
Signed-off-by: Luuk van Baal <luukvbaal@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Can't use getpos('v') in OptionSet when using setbufvar().
Solution: Don't reset Visual selection when switching to the same
buffer (zeertzjq).
closes: #17373
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: When an autocommand executes for a non-current buffer,
'eventignorewin' is only checked from the buffer's last
wininfo (overwrites win_ignore in the loop), not from the
value of 'eventignorewin' in all windows showing the buffer as
described (after v9.1.1084)
Solution: Fix the check and don't use wininfo, as that may only contain
windows that recently showed the buffer. Consider all the
buffer's windows in all tabpages (Sean Dewar).
closes: #17294
Signed-off-by: Sean Dewar <6256228+seandewar@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: cannot get information about command line completion
Solution: add CmdlineLeavePre autocommand and cmdcomplete_info() Vim
script function (Girish Palya)
This commit introduces two features to improve introspection and control
over command-line completion in Vim:
- Add CmdlineLeavePre autocmd event:
A new event triggered just before leaving the command line and before
CmdlineLeave. It allows capturing completion-related state that is
otherwise cleared by the time CmdlineLeave fires.
- Add cmdcomplete_info() Vim script function:
Returns a Dictionary with details about the current command-line
completion state.
These are similar in spirit to InsertLeavePre and complete_info(),
but focused on command-line mode.
**Use case:**
In [[PR #16759](https://github.com/vim/vim/pull/16759)], two examples
demonstrate command-line completion: one for live grep, and another for
fuzzy file finding. However, both examples share two key limitations:
1. **Broken history recall (`<Up>`)**
When selecting a completion item via `<Tab>` or `<C-n>`, the original
pattern used for searching (e.g., a regex or fuzzy string) is
overwritten in the command-line history. This makes it impossible to
recall the original query later.
This is especially problematic for interactive grep workflows, where
it’s useful to recall a previous search and simply select a different
match from the menu.
2. **Lack of default selection on `<CR>`**
Often, it’s helpful to allow `<CR>` (Enter) to accept the first match
in the completion list, even when no item is explicitly selected. This
behavior is particularly useful in fuzzy file finding.
----
Below are the updated examples incorporating these improvements:
**Live grep, fuzzy find file, fuzzy find buffer:**
```vim
command! -nargs=+ -complete=customlist,GrepComplete Grep VisitFile()
def GrepComplete(arglead: string, cmdline: string, cursorpos: number):
list<any>
return arglead->len() > 1 ? systemlist($'grep -REIHns "{arglead}"' ..
' --exclude-dir=.git --exclude=".*" --exclude="tags" --exclude="*.swp"') : []
enddef
def VisitFile()
if (selected_match != null_string)
var qfitem = getqflist({lines: [selected_match]}).items[0]
if qfitem->has_key('bufnr') && qfitem.lnum > 0
var pos = qfitem.vcol > 0 ? 'setcharpos' : 'setpos'
exec $':b +call\ {pos}(".",\ [0,\ {qfitem.lnum},\ {qfitem.col},\ 0]) {qfitem.bufnr}'
setbufvar(qfitem.bufnr, '&buflisted', 1)
endif
endif
enddef
nnoremap <leader>g :Grep<space>
nnoremap <leader>G :Grep <c-r>=expand("<cword>")<cr>
command! -nargs=* -complete=customlist,FuzzyFind Find
execute(selected_match != '' ? $'edit {selected_match}' : '')
var allfiles: list<string>
autocmd CmdlineEnter : allfiles = null_list
def FuzzyFind(arglead: string, _: string, _: number): list<string>
if allfiles == null_list
allfiles = systemlist($'find {get(g:, "fzfind_root", ".")} \! \(
-path "*/.git" -prune -o -name "*.swp" \) -type f -follow')
endif
return arglead == '' ? allfiles : allfiles->matchfuzzy(arglead)
enddef
nnoremap <leader><space> :<c-r>=execute('let
fzfind_root="."')\|''<cr>Find<space><c-@>
nnoremap <leader>fv :<c-r>=execute('let
fzfind_root="$HOME/.vim"')\|''<cr>Find<space><c-@>
nnoremap <leader>fV :<c-r>=execute('let
fzfind_root="$VIMRUNTIME"')\|''<cr>Find<space><c-@>
command! -nargs=* -complete=customlist,FuzzyBuffer Buffer execute('b '
.. selected_match->matchstr('\d\+'))
def FuzzyBuffer(arglead: string, _: string, _: number): list<string>
var bufs = execute('buffers', 'silent!')->split("\n")
var altbuf = bufs->indexof((_, v) => v =~ '^\s*\d\+\s\+#')
if altbuf != -1
[bufs[0], bufs[altbuf]] = [bufs[altbuf], bufs[0]]
endif
return arglead == '' ? bufs : bufs->matchfuzzy(arglead)
enddef
nnoremap <leader><bs> :Buffer <c-@>
var selected_match = null_string
autocmd CmdlineLeavePre : SelectItem()
def SelectItem()
selected_match = ''
if getcmdline() =~ '^\s*\%(Grep\|Find\|Buffer\)\s'
var info = cmdcomplete_info()
if info != {} && info.pum_visible && !info.matches->empty()
selected_match = info.selected != -1 ? info.matches[info.selected] : info.matches[0]
setcmdline(info.cmdline_orig). # Preserve search pattern in history
endif
endif
enddef
```
**Auto-completion snippet:**
```vim
set wim=noselect:lastused,full wop=pum wcm=<C-@> wmnu
autocmd CmdlineChanged : CmdComplete()
def CmdComplete()
var [cmdline, curpos] = [getcmdline(), getcmdpos()]
if getchar(1, {number: true}) == 0 # Typehead is empty (no more pasted input)
&& !pumvisible() && curpos == cmdline->len() + 1
&& cmdline =~ '\%(\w\|[*/:.-]\)$' && cmdline !~ '^\d\+$' # Reduce noise
feedkeys("\<C-@>", "ti")
SkipCmdlineChanged() # Suppress redundant completion attempts
# Remove <C-@> that get inserted when no items are available
timer_start(0, (_) => getcmdline()->substitute('\%x00', '', 'g')->setcmdline())
endif
enddef
cnoremap <expr> <up> SkipCmdlineChanged("\<up>")
cnoremap <expr> <down> SkipCmdlineChanged("\<down>")
autocmd CmdlineEnter : set bo+=error
autocmd CmdlineLeave : set bo-=error
def SkipCmdlineChanged(key = ''): string
set ei+=CmdlineChanged
timer_start(0, (_) => execute('set ei-=CmdlineChanged'))
return key != '' ? ((pumvisible() ? "\<c-e>" : '') .. key) : ''
enddef
```
These customizable snippets can serve as *lightweight* and *native*
alternatives to picker plugins like **FZF** or **Telescope** for common,
everyday workflows. Also, live grep snippet can replace **cscope**
without the overhead of building its database.
closes: #17115
Signed-off-by: Girish Palya <girishji@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Unnecessary use of STRCAT() in au_event_disable(). STRCAT()
seeks to the end of new_ei, but here the end is already known.
Solution: Use STRCPY() and add p_ei_len to new_ei. Also fix a typo in a
comment. Add a test that 'eventignore' works in :argdo
(zeertzjq).
closes: #16844
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Unable to persistently ignore events in a window and its buffers.
Solution: Add 'eventignorewin' option to ignore events in a window and buffer
(Luuk van Baal)
Add the window-local 'eventignorewin' option that is analogous to
'eventignore', but applies to a certain window and its buffers. Identify
events that should be allowed in 'eventignorewin', adapt "auto_event"
and "event_tab" to encode this information. Window context is not passed
onto apply_autocmds_group(), and when to ignore an event is a bit
ambiguous when "buf" is not "curbuf", rather than a large refactor, only
ignore an event when all windows into "buf" are ignoring the event.
closes: #16530
Signed-off-by: Luuk van Baal <luukvbaal@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: string_T struct could be used more often
Solution: Refactor code and make use of string_T struct
for key-value pairs, reformat overlong lines
(John Marriott)
closes: #15975
Signed-off-by: John Marriott <basilisk@internode.on.net>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: hard to detect cursor movement in the command line
Solution: Add the CursorMovedC autocommand
(Shougo Matsushita)
closes: #15040
Signed-off-by: Shougo Matsushita <Shougo.Matsu@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Crash when using autocmd_get() after removing event inside
autocmd (Sergey Vlasov)
Solution: Check that the pattern is NULL (zeertzjq).
fixes: #14937closes: #14939
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: a few memory leaks are found
(LuMingYinDetect )
Solution: properly free the memory
Fixes the following problems:
- Memory leak in f_maplist()
fixes: #14486
- Memory leak in option.c
fixes: #14485
- Memory leak in f_resolve()
fixes: #14484
- Memory leak in f_autocmd_get()
related: #14474
- Memory leak in dict_extend_func()
fixes: #14477fixes: #14238closes: #14517
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Autocommand may change currect directory after :tcd and :lcd.
Solution: Also clear tp_localdir and w_localdir when using aucmd_win.
(zeertzjq)
closes: #14435
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Finding autocmd events is inefficient
Solution: Use binary search to find events, cache last found events,
avoid use of strlen(), add SessionWritePost autocmd,
fix test_codestyle and avoid endless loop
(John Marriott)
closes: #14287
Signed-off-by: John Marriott <basilisk@internode.on.net>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Filetype may be undetected when a SwapExists autocommand sets
filetype in another buffer.
Solution: Make filetype detection state buffer-specific. Also fix a
similar problem for 'modified' (zeertzjq).
closes: #14344
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: saving and restoring all frames to split-move is overkill now
that WinNewPre is not fired when split-moving.
Solution: defer the flattening of frames until win_split_ins begins
reorganising them, and attempt to restore the layout by
undoing our changes. (Sean Dewar)
This also means we no longer must allocate.
related: #14042
Signed-off-by: Sean Dewar <6256228+seandewar@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: win_split_ins has no check for E36 when moving an existing
window
Solution: check for room and fix the issues in f_win_splitmove()
(Sean Dewar)
win_split_ins has no check for E36 when moving an existing window,
allowing for layouts with many overlapping zero-sized windows to be
created (which may also cause drawing issues with tablines and such).
f_win_splitmove also has some bugs.
So check for room and fix the issues in f_win_splitmove. Handle failure
in the two relevant win_split_ins callers by restoring the original
layout, and factor the common logic into win_splitmove.
Don't check for room when opening an autocommand window, as it's a
temporary window that's rarely interacted with or drawn anyhow, and is
rather important for some autocommands.
Issues fixed in f_win_splitmove:
- Error if splitting is disallowed.
- Fix heap-use-after-frees if autocommands fired from switching to "targetwin"
close "wp" or "oldwin".
- Fix splitting the wrong window if autocommands fired from switching to
"targetwin" switch to a different window.
- Ensure -1 is returned for all errors.
Also handle allocation failure a bit earlier in make_snapshot (callers,
except win_splitmove, don't really care if a snapshot can't be made, so
just ignore the return value).
Note: Test_smoothscroll_in_zero_width_window failed after these changes with
E36, as it was using the previous behaviour to create a zero-width window.
I've fixed the test such that it fails with UBSAN as expected when v9.0.1367 is
reverted (and simplified it too).
related: #14042
Signed-off-by: Sean Dewar <6256228+seandewar@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: No event is triggered before creating a window.
(Sergey Vlasov)
Solution: Add the WinNewPre event (Sergey Vlasov)
fixes: #10635closes: #12761
Signed-off-by: Sergey Vlasov <sergey@vlasov.me>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Modifying a hidden buffer still interferes with prompt buffer
mode changes.
Solution: Save and restore b_prompt_insert.
(zeertzjq)
closes: #13875
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Modifying hidden buffer still interferes with prompt buffer mode changes
Problem: cannot complete option values
Solution: Add completion functions for several options
Add cmdline tab-completion for setting string options
Add tab-completion for setting string options on the cmdline using
`:set=` (along with `:set+=` and `:set-=`).
The existing tab completion for setting options currently only works
when nothing is typed yet, and it only fills in with the existing value,
e.g. when the user does `:set diffopt=<Tab>` it will be completed to
`set diffopt=internal,filler,closeoff` and nothing else. This isn't too
useful as a user usually wants auto-complete to suggest all the possible
values, such as 'iblank', or 'algorithm:patience'.
For set= and set+=, this adds a new optional callback function for each
option that can be invoked when doing completion. This allows for each
option to have control over how completion works. For example, in
'diffopt', it will suggest the default enumeration, but if `algorithm:`
is selected, it will further suggest different algorithm types like
'meyers' and 'patience'. When using set=, the existing option value will
be filled in as the first choice to preserve the existing behavior. When
using set+= this won't happen as it doesn't make sense.
For flag list options (e.g. 'mouse' and 'guioptions'), completion will
take into account existing typed values (and in the case of set+=, the
existing option value) to make sure it doesn't suggest duplicates.
For set-=, there is a new `ExpandSettingSubtract` function which will
handle flag list and comma-separated options smartly, by only suggesting
values that currently exist in the option.
Note that Vim has some existing code that adds special handling for
'filetype', 'syntax', and misc dir options like 'backupdir'. This change
preserves them as they already work, instead of converting to the new
callback API for each option.
closes: #13182
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: :bwipe fails after switching window from aucmd_win.
Solution: Decrement b_nwindows after switching back to aucmd_win.
closes: #13160
Signed-off-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: Empty CmdlineEnter autocommand causes errors in Ex mode.
Solution: Save and restore ex_pressedreturn. (Christian Brabandt,
closes # 12581, closes#12578)
Problem: :stopinsert may not work in a popup close handler. (Ben Jackson)
Solution: Restore stop_insert_mode when appropriate. (closes#12452,
closes#12434)
Problem: RedrawingDisabled not used consistently.
Solution: Avoid RedrawingDisabled going negative. Set RedrawingDisabled in
win_split_ins(). (closes#11961)
Problem: Using a <Cmd> mapping CmdlineChanged may be triggered twice.
Solution: Count the number of times CmdlineChanged is triggered and avoid
doing it twice. (closes#116820
