The new native commenting functionality is currently not used when
editing mail. One could reasonably expect it to change the "quote" state
of any given line in the mail (i.e. the preceding ">"), which would be
very handy and feel natural when editing mail. Especially since the
current file already uses "setlocal comments+=n:>".
Solution: Add commentstring to `> %s` to be used in files of type mail.
closes: #16669
Signed-off-by: Lucas Eekhof <105216949+eekhof@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Highlight groups PopupSelected/PopupNotification/
MessageWindow are supposed to fall back to default highlight
groups if they are not defined. However, once a colorscheme
has defined them, switching to another colorscheme that
doesn't do so will leave behind a cleared colorscheme, which
causes the fallback to fail.
Solution: Set up default links to the relevant fallback highlight
groups, which makes sure a `:hi clear` command will reset the
state properly (Yee Cheng Chin).
closes: #16676
Signed-off-by: Yee Cheng Chin <ychin.git@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: enabling termguicolors automatically confuses users. Since
querying the terminal for the RGB flag happens asynchronously,
enabling termguicolors is noticeable by users as the highlighting changes
and is therefore unexpected.
(after v9.1.1054)
Solution: comment out that part for now. We may need another way to
enable this in the future.
fixes: #16539fixes: #16568fixes: #16649
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim tests are slow and flaky at the same time due to reliance
on timeouts which are unreliable.
Solution: improve Vim test performance and reduce flakiness
(Yee Cheng Chin)
A lot of Vim tests currently rely on waiting a specific amount of time
before asserting a condition. This is bad because 1) it is slow, as the
timeout is hardcoded, 2) it's unreliable as a resource-starved runner
may overshoot the timeout. Also, there are a lot of builtin sleep
commands in commonly used utilities like VerifyScreenDump and WaitFor()
which leads to a lot of unnecessary idle time.
Fix these issues by doing the following:
1. Make utilities like VerifyScreenDump and WaitFor use the lowest wait
time possible (1 ms). This essentially turns it into a spin wait. On
fast machines, these will finish very quickly. For existing tests
that had an implicit reliance on the old timeouts (e.g.
VerifyScreenDump had a 50ms wait before), fix the tests to wait that
specific amount explicitly.
2. Fix tests that sleep or wait for long amounts of time to instead
explicitly use a callback mechanism to be notified when a child
terminal job has finished. This allows the test to only take as much
time as possible instead of having to hard code an unreliable
timeout.
With these fixes, tests should 1) completely quickly on fast machines,
and 2) on slow machines they will still run to completion albeit slowly.
Note that previoulsy both were not true. The hardcoded timeouts meant
that on fast machines the tests were mostly idling wasting time, whereas
on slow machines, the timeouts often were not generous enough to allow
them to run to completion.
closes: #16615
Signed-off-by: Yee Cheng Chin <ychin.git@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: no support for protected new() method
Solution: support the protected "_new()" object method
(Yegappan Lakshmanan)
closes: #16604
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: completion doesn't work with multi lines
(Łukasz Jan Niemier)
Solution: handle linebreaks in completion code as expected
(glepnir)
fixes: #2505closes: #15373
Signed-off-by: glepnir <glephunter@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Unable to persistently ignore events in a window and its buffers.
Solution: Add 'eventignorewin' option to ignore events in a window and buffer
(Luuk van Baal)
Add the window-local 'eventignorewin' option that is analogous to
'eventignore', but applies to a certain window and its buffers. Identify
events that should be allowed in 'eventignorewin', adapt "auto_event"
and "event_tab" to encode this information. Window context is not passed
onto apply_autocmds_group(), and when to ignore an event is a bit
ambiguous when "buf" is not "curbuf", rather than a large refactor, only
ignore an event when all windows into "buf" are ignoring the event.
closes: #16530
Signed-off-by: Luuk van Baal <luukvbaal@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: has('bsd') is true for GNU/Hurd
Solution: exclude GNU/Hurd from BSD feature flag
(Zhaoming Luo)
GNU/Hurd, like Mac OS X, is a BSD-based system. It should exclude
has('bsd') feature just like what Mac OS X does. The __GNU__ pre-defined
macro indicates it's compiled for GNU/Hurd.
closes: #16580
Signed-off-by: Zhaoming Luo <zhmingluo@163.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Cannot control cursor positioning of getchar().
Solution: Add "cursor" flag to {opts}, with possible values "hide",
"keep" and "msg".
related: #10603closes: #16569
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: getchar() can't distinguish between C-I and Tab.
Solution: Add {opts} to pass extra flags to getchar() and getcharstr(),
with "number" and "simplify" keys.
related: #10603closes: #16554
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: not possible to use plural forms with gettext()
Solution: implement ngettext() Vim script function (Christ van Willegen)
closes: #16561
Signed-off-by: Christ van Willegen <cvwillegen@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim always enables 'termguicolors' in a terminal, even
when not wanted (after v9.1.1054)
Solution: Respect `:set notermguicolors` in vimrc file
fixes: #16538fixes: #16539closes: #16540
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim doesn't highlight to be inserted text when completing
Solution: Add support for the "preinsert" 'completeopt' value
(glepnir)
Support automatically inserting the currently selected candidate word
that does not belong to the latter part of the leader.
fixes: #3433closes: #16403
Signed-off-by: glepnir <glephunter@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
relevant commits:
- deprecate!: netrw#Launch, netrw#Open and gx mappings
- refactor: move some utility functions in a private file
- feat: add function to deprecate features
- refactor!: remove NetrwClean command and function
- refactor: use appropriate directories to store temporary files
- refactor: better way to call vim.ui.open
- refactor(Open): prefer lua wrapper function instead of cmdline
- refactor!: drop vim 7 checks
- refactor: use vim.ui.open when using neovim
- refactor: remove s:CheckIfKde
- refactor: balloon functionality
- refactor!: remove netrw#Access function
closes: #16519
Signed-off-by: Luca Saccarola <github.e41mv@aleeas.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim doesn't work well with TERM=xterm-direct
(Andrea Pappacoda)
Solution: detect if a terminal supports true-colors and
enable termguicolors
The terminfo database for xterm-direct contains both the (non-standard)
termcap RGB capability and a number of colors == 0x1000000 so it seems
either of those two options can be used to detect a terminal capable of
displaying true colors.
So set the termguicolor option automatically, when either of the two
options is detected. (for some reasons, my debian xterm (v393) does not
respond to XTGETTCAP query attempts, so falling back to the number of
colors seems like a good compromize)
fixes: #16327closes: #16490
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: Patch 9.1.1014 causes regressions
Solution: revert it for now
This reverts commit 57f0119358 since this
causes some regressions:
https://github.com/vim/vim/pull/16440#issuecomment-2600235629
So revert "patch 9.1.1014: Vim9: variable not found in transitive
import" for now.
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim9: comments are outdated
Solution: Update comments, and include an enum example in the help
(Yegappan Lakshmanan)
closes: #16485
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: filetype: setting bash filetype is backwards incompatible
Solution: revert patch v9.1.0965, detect bash scripts again as sh
filetype
This reverts commit b9b762c21f.
related: #16309
Signed-off-by: Christian Brabandt <cb@256bit.org>
- highlight more C keywords, including some from C23
Conditionally highlight C23 features:
- #embed, #elifdef and #elifndef preprocessor directives
- predefined macros
- UTF-8 character constants
- binary integer constants, _BitInt literals, and digit separators
- nullptr_t type and associated constant
- decimal real floating-point, bit precise and char types
- typeof operators
Matchit:
- update for new preprocessor directives
fixes: #13667fixes: #13679closes: #12984
Co-authored-by: Albin Ahlbäck <albin.ahlback@gmail.com>
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: the installer can be improved
Solution: update the installer with the correct README and LICENSE
files, improve the documentation, add a Makefile for the
installer, update the Makefiles (RestorerZ)
fixes: #16378closes: #16378
Signed-off-by: RestorerZ <restorer@mail2k.ru>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Dr. Chip retired some time ago and is no longer maintaining the netrw
plugin. However as a runtime plugin distributed by Vim, it important to
maintain the netrw plugin in the future and fix bugs as they are
reported.
So, split out the netrw plugin as an additional package, however include
some stubs to make sure the plugin is still loaded by default and the
documentation is accessible as well.
closes: #16368
Signed-off-by: Luca Saccarola <github.e41mv@aleeas.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: wrong return type of blob2str()
Solution: update return to list of string
(Yegappan Lakshmanan)
closes: #16461
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: blob2str/str2blob() do not support list of strings
(after v9.1.1016)
Solution: Add support for using a list of strings (Yegappan Lakshmanan)
closes: #16459
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: no way to get current selected item in a async context
Solution: add completed flag to show the entries of currently selected
index item (@glepnir)
closes: #16451
Signed-off-by: glepnir <glephunter@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Use str2blob()/blob2str() functions in examples given.
closes: #16449
Signed-off-by: Maxim Kim <habamax@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Not possible to convert string2blob and blob2string
Solution: add support for the blob2str() and str2blob() functions
closes: #16373
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: diff feature can be improved
Solution: include the linematch diff alignment algorithm
(Jonathon)
closes: #9661
Signed-off-by: Jonathon <jonathonwhite@protonmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Also, fold the difference part and the bottom part for the
identical screendump files.
closes: #16380
Co-authored-by: D. Ben Knoble <ben.knoble+github@gmail.com>
Signed-off-by: Aliaksei Budavei <0x000c70@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: PmenuMatch completion highlight can be combined
Solution: Combine highlight groups PmenuMatch with Pmenu and
PmenuMatchSel with PmenuSel (glepnir)
fixes: #15563closes: #16408
Signed-off-by: glepnir <glephunter@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: ComplMatchIns highlight hard to read on light background
(after v9.1.0996)
Solution: define the highlighting group cleared, it should be configured in
colorschemes separately (glepnir)
closes: #16414
Signed-off-by: glepnir <glephunter@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: v:stacktrace has wrong type in Vim9 script.
Solution: Change the type to t_list_dict_any. Fix grammar in docs.
(zeertzjq)
closes: #16390
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
