Problem: cannot style popup window (border, shadow, etc)
Solution: Extend the 'completepopup' option with additional properties
(Girish Palya)
This patch extends the 'completepopup' option with additional settings
to allow more configuration of info popup window.
New values:
```
- close "on" (default) or "off"
- resize "on" (default) or "off"
- borderchars specify eight characters (separated by semicolons) to
draw the popup border: top, right, bottom, left,
topleft, topright, botright, botleft.
- borderhighlight highlight group for the popup border characters
- shadow pum shadow
```
closes: #18487
Signed-off-by: Girish Palya <girishji@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Use double sentence spacing and wrap lines at 'textwidth'. Code
examples and tables were not wrapped unless this had already been done
locally.
closes: #18453
Signed-off-by: Doug Kearns <dougkearns@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: not possible to style popup borders globally
Solution: Add the 'pumborder' option (Girish Palya)
This commit introduces a new global option, 'pumborder' ('pb'), that
allows users to define borders and optional decorations for the
completion popup menu.
```
Defines a border and optional decorations for the popup menu in
completion. The value is a comma-separated list of keywords.
Border styles (at most one):
"single"singleuse thin box-drawing characters
"double"doubleuse double-line box-drawing characters
"round"rounduse rounded corners
"ascii"asciiuse ASCII characters (-, |, +)
"custom:XXXXXXXX"
use eight characters given after "custom:",
in order: top, right, bottom, left,
topleft, topright, botright, botleft
Additional flags:
"margin"marginadds one-cell spacing inside the left and right border
"shadow"shadowdraws a shadow at the right and bottom edges
Highlight groups:
|hl-PmenuBorder|hl-PmenuBorderused for the border characters
|hl-PmenuShadow|hl-PmenuShadowused for the shadow
Examples: >
:set pumborder=single
:set pumborder=double,margin,shadow
:set pumborder=custom:─│─│┌┐┘└,shadow
Border styles using box-drawing characters ("single", "double",
"round") are only available when |'encoding'| is "utf-8" and
|'ambiwidth'| is "single". "margin" requires a border style.
See also: |ins-completion-menu|.
```
fixes: https://github.com/vim/vim/pull/18441#issuecomment-3360188458closes: #18486closes: #17091
Signed-off-by: Girish Palya <girishji@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: MS-Windows: not possible to highlight the title bar
Solution: Make the title/caption bar configurable by introducing the
'go-C' option value which allows to highlight it using the
TitleBar and TitleBarNC highlighting groups (Mao-Yining).
Introduce titlebar color customization for Windows 11 GUI through
highlight groups and new 'guioptions' flag:
- Add 'C' flag to enable titlebar color customization (opt-in)
- New highlight groups: TitleBar (active) and TitleBarNC (inactive)
- Uses DWMWA_CAPTION_COLOR and DWMWA_TEXT_COLOR DWM attributes
- Dynamically loads dwmapi.dll for Windows 11 compatibility
- Defaults to system colors when set to NONE or feature disabled
closes: #18449
Signed-off-by: Mao-Yining <mao.yining@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Cannot configure the inner foldlevel indicator for the
foldcolumn
Solution: Add "foldinner" suboption value to the 'fillchar' option
(Maria José Solano).
closes: #18365
Signed-off-by: Maria José Solano <majosolano99@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: 'nowrap' in a modeline may hide malicious code.
Solution: Forcibly use '>' as 'listchars' "extends" if 'nowrap' was set
from a modeline (zeertzjq).
Manual `:setlocal nowrap` disables this behavior. There is a separate
problem with `:set nowrap` that also applies to some other options.
related: #18214
related: #18399closes: #18425
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: completion: autocompletion can be improved
Solution: Add support for "longest" and "preinsert" in 'autocomplete';
add preinserted() (Girish Palya)
* Add support for "longest" in 'completeopt' when 'autocomplete'
is enabled. (Note: the cursor position does not change automatically
when 'autocomplete' is enabled.)
* Add support for "preinsert" when 'autocomplete' is enabled. Ensure
"preinsert" works the same with and without 'autocomplete'
* introduce the preinserted() Vim script function, useful for defining
custom key mappings.
fixes: #18314closes: #18387
Signed-off-by: Girish Palya <girishji@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Wayland code can be improved
Solution: Refactor Wayland Clipboard code (Foxe Chen).
This the second attempt to refactor the Wayland code base:
- Move clipboard code from wayland.c to clipboard.c
- Use C99 bool type
- Properly poll the Wayland display file descriptor
- Instead of checking if the data source is not NULL in order to
determine if a selection event comes from us, use a special mime type
to identify selection events coming from ourselves. The problem with
the previous approach is that race conditions may occur.
- Put the focus stealing code under a new feature "wayland_focus_steal"
- Use ELAPSED_* macros instead of gettimeofday()
- Pass tests
- Reimplement commented out code
- Update docs
- Make Wayland clipboard behaviour more in line with X11 when connection
is lost
- add missing malloc checks and possible memory leaks + refactored some
tests.
closes: #18324
Signed-off-by: Foxe Chen <chen.foxe@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: completion: 'autocomplete' cannot be enabled per buffer
(Tomasz N)
Solution: Make 'autocomplete' global or local to buffer (Girish Palya)
fixes: #18320closes: #18333
Signed-off-by: Girish Palya <girishji@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: 'ruler' is set in defaults.vim, but not enabled by default in
non-compatible mode.
Solution: set the ruler option in non-compatible mode, remove it from
defaults.vim, update tests
closes: #18260
Signed-off-by: Christian Brabandt <cb@256bit.org>
Add minimal reference to LSP. It might help new users.
closes: #18276
Signed-off-by: Girish Palya <girishji@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: defaults: 'diffopt' option value can be improved
Solution: Update diffopt defaults to include "indent-heuristic" and
"inline:char" (Yee Cheng Chin)
The default diff options have not been updated much despite new
functionality having been added to Vim.
- indent-heurstic: This has been enabled by default in Git since
33de716387 in 2017. Given that Vim uses xdiff from Git, it makes sense
to track the default configuration from Git.
- inline:char: This turns on character-wise inline highlighting which is
generally much better than the default inline:simple. It has been
implemented since #16881 and we have not seen reports of any issues
with it, and it has received good feedbacks.
closes: #18255
Signed-off-by: Yee Cheng Chin <ychin.git@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Manual completion can still be used when 'autocomplete' is set, so
saying "active" is better than "enabled".
closes: #18261
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: completion: preinserted text highlighed using ComplMatchIns
Solution: Use highlighting group PreInsert and update the documentation
(Girish Palya).
When "preinsert" is included in 'completeopt', only the PreInsert
highlight group should be applied, whether autocompletion is active or not.
Previously, ComplMatchIns was used when autocompletion was not enabled.
Related to https://github.com/vim/vim/pull/18213.
closes: #18254
Signed-off-by: Girish Palya <girishji@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: complete: preinsert does not work well with preinsert
Solution: Make "preinsert" completeopt value work with autocompletion
(Girish Palya)
This change extends Insert mode autocompletion so that 'preinsert' also
works when 'autocomplete' is enabled.
Try: `:set ac cot=preinsert`
See `:help 'cot'` for more details.
closes: #18213
Signed-off-by: Girish Palya <girishji@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Wayland code can be improved
Solution: Refactor Wayland Clipboard code (Foxe Chen)
This refactor makes the Wayland codebase less convoluted:
- Move clipboard code in wayland.c to clipboard.c
- Use C99 bool type
- Properly poll the Wayland display file descriptor
- Instead of checking if the data source is not NULL in order to
determine if a selection event comes from us, use a special mime type to
identify selection events coming from ourselves. The problem with the
previous approach is that race conditions may occur.
- Put the focus stealing code under a new feature "wayland_focus_steal"
- Use ELAPSED_* macros instead of gettimeofday()
- Pass tests
- Reimplement commented out code
- Update docs
- Make Wayland clipboard behaviour more in line with X11 when connection is lost
- add missing malloc checks and possible memory leaks + refactored some
tests.
closes: #18139
Signed-off-by: Foxe Chen <chen.foxe@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: completion: not possible to delay the autcompletion
Solution: add the 'autocompletedelay' option value (Girish Palya).
This patch introduces a new global option 'autocompletedelay'/'acl' that
specifies the delay, in milliseconds, before the autocomplete menu
appears after typing.
When set to a non-zero value, Vim waits for the specified time before
showing the completion popup, allowing users to reduce distraction from
rapid suggestion pop-ups or to fine-tune the responsiveness of
completion.
The default value is 0, which preserves the current immediate-popup
behavior.
closes: #17960
Signed-off-by: Girish Palya <girishji@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: diff: using diff anchors with hidden buffers fails silently
Solution: Give specific error message for diff anchors when using hidden
buffers (Yee Cheng Chin).
Diff anchors currently will fail to parse if a buffer used for diff'ing
is hidden. Previously it would just fail as the code assumes it would
not happen normally, but this is actually possible to do if `closeoff`
and `hideoff` are not set in diffopt. Git's default diff tool "vimdiff3"
also takes advantage of this.
This fix this properly would require the `{address}` parser to be
smarter about whether a particular address relies on window position or
not (e.g. the `'.` address requires an active window, but `'a` or `1234`
do not). Since hidden diff buffers seem relatively niche, just provide a
better error message / documentation for now. This could be improved
later if there's a demand for it.
related: #17615closes: #17904
Signed-off-by: Yee Cheng Chin <ychin.git@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: cannot perform autocompletion
Solution: Add the 'autocomplete' option value
(Girish Palya)
This change introduces the 'autocomplete' ('ac') boolean option to
enable automatic popup menu completion during insert mode. When enabled,
Vim shows a completion menu as you type, similar to pressing |i\_CTRL-N|
manually. The items are collected from sources defined in the
'complete' option.
To ensure responsiveness, this feature uses a time-sliced strategy:
- Sources earlier in the 'complete' list are given more time.
- If a source exceeds its allocated timeout, it is interrupted.
- The next source is then started with a reduced timeout (exponentially
decayed).
- A small minimum ensures every source still gets a brief chance to
contribute.
The feature is fully compatible with other |i_CTRL-X| completion modes,
which can temporarily suspend automatic completion when triggered.
See :help 'autocomplete' and :help ins-autocompletion for more details.
To try it out, use :set ac
You should see a popup menu appear automatically with suggestions. This
works seamlessly across:
- Large files (multi-gigabyte size)
- Massive codebases (:argadd thousands of .c or .h files)
- Large dictionaries via the `k` option
- Slow or blocking LSP servers or user-defined 'completefunc'
Despite potential slowness in sources, the menu remains fast,
responsive, and useful.
Compatibility: This mode is fully compatible with existing completion
methods. You can still invoke any CTRL-X based completion (e.g.,
CTRL-X CTRL-F for filenames) at any time (CTRL-X temporarily
suspends 'autocomplete'). To specifically use i_CTRL-N, dismiss the
current popup by pressing CTRL-E first.
---
How it works
To keep completion snappy under all conditions, autocompletion uses a
decaying time-sliced algorithm:
- Starts with an initial timeout (80ms).
- If a source does not complete within the timeout, it's interrupted and
the timeout is halved for the next source.
- This continues recursively until a minimum timeout (5ms) is reached.
- All sources are given a chance, but slower ones are de-prioritized
quickly.
Most of the time, matches are computed well within the initial window.
---
Implementation details
- Completion logic is mostly triggered in `edit.c` and handled in
insexpand.c.
- Uses existing inc_compl_check_keys() mechanism, so no new polling
hooks are needed.
- The completion system already checks for user input periodically; it
now also checks for timer expiry.
---
Design notes
- The menu doesn't continuously update after it's shown to prevent
visual distraction (due to resizing) and ensure the internal list
stays synchronized with the displayed menu.
- The 'complete' option determines priority—sources listed earlier get
more time.
- The exponential time-decay mechanism prevents indefinite collection,
contributing to low CPU usage and a minimal memory footprint.
- Timeout values are intentionally not configurable—this system is
optimized to "just work" out of the box. If autocompletion feels slow,
it typically indicates a deeper performance bottleneck (e.g., a slow
custom function not using `complete_check()`) rather than a
configuration issue.
---
Performance
Based on testing, the total roundtrip time for completion is generally
under 200ms. For common usage, it often responds in under 50ms on an
average laptop, which falls within the "feels instantaneous" category
(sub-100ms) for perceived user experience.
| Upper Bound (ms) | Perceived UX
|----------------- |-------------
| <100 ms | Excellent; instantaneous
| <200 ms | Good; snappy
| >300 ms | Noticeable lag
| >500 ms | Sluggish/Broken
---
Why this belongs in core:
- Minimal and focused implementation, tightly integrated with existing
Insert-mode completion logic.
- Zero reliance on autocommands and external scripting.
- Makes full use of Vim’s highly composable 'complete' infrastructure
while avoiding the complexity of plugin-based solutions.
- Gives users C native autocompletion with excellent responsiveness and
no configuration overhead.
- Adds a key UX functionality in a simple, performant, and Vim-like way.
closes: #17812
Signed-off-by: Girish Palya <girishji@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: cannot easily trigger wildcard expansion
Solution: Introduce wildtrigger() function
(Girish Palya)
This PR introduces a new `wildtrigger()` function.
See `:h wildtrigger()`
`wildtrigger()` behaves like pressing the `wildchar,` but provides a
more refined and controlled completion experience:
- Suppresses beeps when no matches are found.
- Avoids displaying irrelevant completions (like full command lists)
when the prefix is insufficient or doesn't match.
- Skips completion if the typeahead buffer has pending input or if a
wildmenu is already active.
- Does not print "..." before completion.
This is an improvement on the `feedkeys()` based autocompletion script
given in #16759.
closes: #17806
Signed-off-by: Girish Palya <girishji@gmail.com>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: not possible to anchor specific lines in difff mode
Solution: Add support for the anchoring lines in diff mode using the
'diffanchor' option (Yee Cheng Chin).
Adds support for anchoring specific lines to each other while viewing a
diff. While lines are anchored, they are guaranteed to be aligned to
each other in a diff view, allowing the user to control and inform the
diff algorithm what the desired alignment is. Internally, this is done
by splitting up the buffer at each anchor and run the diff algorithm on
each split section separately, and then merge the results back for a
logically consistent diff result.
To do this, add a new "diffanchors" option that takes a list of
`{address}`, and a new "diffopt" option value "anchor". Each address
specified will be an anchor, and the user can choose to use any type of
address, including marks, line numbers, or pattern search. Anchors are
sorted by line number in each file, and it's possible to have multiple
anchors on the same line (this is useful when doing multi-buffer diff).
Update documentation to provide examples.
This is similar to Git diff's `--anchored` flag. Other diff tools like
Meld/Araxis Merge also have similar features (called "synchronization
points" or "synchronization links"). We are not using Git/Xdiff's
`--anchored` implementation here because it has a very limited API
(it requires usage of the Patience algorithm, and can only anchor
unique lines that are the same across both files).
Because the user could anchor anywhere, diff anchors could result in
adjacent diff blocks (one block is directly touching another without a
gap), if there is a change right above the anchor point. We don't want
to merge these diff blocks because we want to line up the change at the
anchor. Adjacent diff blocks were first allowed when linematch was
added, but the existing code had a lot of branched paths where
line-matched diff blocks were handled differently. As a part of this
change, refactor them to have a more unified code path that is
generalized enough to handle adjacent diff blocks correctly and without
needing to carve in exceptions all over the place.
closes: #17615
Signed-off-by: Yee Cheng Chin <ychin.git@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: defaults: 'showcmd' is not enabled in non-compatible mode on
Unix
Solution: Always enable 'showcmd' in non-compatible mode, drop it from
defaults.vim.
'showcmd' was already always enabled in Vim compatible mode except for
UNIX environments. So let's just enable it always, there is no good
reason why UNIX platforms should be handled differently than other
platforms, especially since `defaults.vim` did enable this option
anyhow.
closes: #17739
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: The maximum search count uses a hard-coded value of 99
(Andres Monge, Joschua Kesper)
Solution: Make it configurable using the 'maxsearchcount' option.
related: #8855fixes: #17527closes: #17695
Signed-off-by: Christian Brabandt <cb@256bit.org>
