Update runtime files.

runtime/doc/motion.txt

@@ -1,4 +1,4 @@
-*motion.txt*    For Vim version 8.2.  Last change: 2020 Oct 18
+*motion.txt*    For Vim version 8.2.  Last change: 2021 Mar 28
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -942,8 +942,7 @@ These commands are not marks themselves, but jump to a mark:
 			line.
 
 							*]`*
-]`			[count] times to lowercase mark after the cursor. {not
-			in Vi}
+]`			[count] times to lowercase mark after the cursor.
 
 							*['*
 ['			[count] times to previous line with a lowercase mark
@@ -1037,6 +1036,12 @@ CTRL-I			Go to [count] newer cursor position in jump list
 			(not a motion command).
 			{not available without the |+jumplist| feature}
 
+			NOTE: In the GUI and in a terminal supporting
+			|modifyOtherKeys|, CTRL-I can be mapped separately
+			from <Tab>, on the condition that CTRL-I is
+			mapped before <Tab>, otherwise the mapping applies to
+			both.
+
 							*:ju* *:jumps*
 :ju[mps]		Print the jump list (not a motion command).
 			{not available without the |+jumplist| feature}
@@ -1054,11 +1059,11 @@ The maximum number of entries is fixed at 100.
 
 For example, after three jump commands you have this jump list:
 
-  jump line  col file/text ~
-    3	  1    0 some text ~
-    2	 70    0 another line ~
-    1  1154   23 end. ~
- > ~
+    jump line  col file/text ~
+      3	  1    0 some text ~
+      2	 70    0 another line ~
+      1  1154   23 end. ~
+   > ~
 
 The "file/text" column shows the file name, or the text at the jump if it is
 in the current file (an indent is removed and a long line is truncated to fit
@@ -1067,11 +1072,11 @@ in the window).
 You are currently in line 1167.  If you then use the CTRL-O command, the
 cursor is put in line 1154.  This results in:
 
-  jump line  col file/text ~
-    2	  1    0 some text ~
-    1	 70    0 another line ~
- >  0  1154   23 end. ~
-    1  1167    0 foo bar ~
+    jump line  col file/text ~
+      2	  1    0 some text ~
+      1	 70    0 another line ~
+   >  0  1154   23 end. ~
+      1  1167    0 foo bar ~
 
 The pointer will be set at the last used jump position.  The next CTRL-O
 command will use the entry above it, the next CTRL-I command will use the
@@ -1098,12 +1103,12 @@ that calling setpos() does not do this.
 After the CTRL-O command that got you into line 1154 you could give another
 jump command (e.g., "G").  The jump list would then become:
 
-  jump line  col file/text ~
-    4	  1    0 some text ~
-    3	 70    0 another line ~
-    2  1167    0 foo bar ~
-    1  1154   23 end. ~
- > ~
+    jump line  col file/text ~
+      4	  1    0 some text ~
+      3	 70    0 another line ~
+      2  1167    0 foo bar ~
+      1  1154   23 end. ~
+   > ~
 
 The line numbers will be adjusted for deleted and inserted lines.  This fails
 if you stop editing a file without writing, like with ":n!".
@@ -1152,7 +1157,7 @@ Note that when text has been inserted or deleted the cursor position might be
 a bit different from the position of the change.  Especially when lines have
 been deleted.
 
-When the |:keepjumps| command modifier is used the position of a change is not
+When the `:keepjumps` command modifier is used the position of a change is not
 remembered.
 
 							*:changes*
@@ -1193,7 +1198,7 @@ remembered.
 			#if, #ifdef, #else, #elif, #endif
 					C preprocessor conditionals (when the
 					cursor is on the # or no ([{
-					following)
+					is following)
 			For other items the matchit plugin can be used, see
 			|matchit-install|.  This plugin also helps to skip
 			matches in comments.
@@ -1222,19 +1227,16 @@ remembered.
 			#if/#else/#endif makes the movement linewise.
 
 						*[(*
-[(			go to [count] previous unmatched '('.
+[(			Go to [count] previous unmatched '('.
 			|exclusive| motion.
-
 						*[{*
-[{			go to [count] previous unmatched '{'.
+[{			Go to [count] previous unmatched '{'.
 			|exclusive| motion.
-
 						*])*
-])			go to [count] next unmatched ')'.
+])			Go to [count] next unmatched ')'.
 			|exclusive| motion.
-
 						*]}*
-]}			go to [count] next unmatched '}'.
+]}			Go to [count] next unmatched '}'.
 			|exclusive| motion.
 
 The above four commands can be used to go to the start or end of the current
@@ -1268,7 +1270,7 @@ bring you back to the switch statement.
 			class.  When no '}' is found before the cursor this is
 			an error. |exclusive| motion.
 
-The above two commands assume that the file contains a class with methods.
+The above four commands assume that the file contains a class with methods.
 The class definition is surrounded in '{' and '}'.  Each method in the class
 is also surrounded with '{' and '}'.  This applies to the Java language.  The
 file looks like this: >
@@ -1282,17 +1284,21 @@ file looks like this: >
 			body_two();
 		}
 	}
+
+[To try this out copy the text and put it in a new buffer, the help text above
+confuses the jump commands]
+
 Starting with the cursor on "body_two()", using "[m" will jump to the '{' at
 the start of "method_two()" (obviously this is much more useful when the
 method is long!).  Using "2[m" will jump to the start of "method_one()".
 Using "3[m" will jump to the start of the class.
 
 						*[#*
-[#			go to [count] previous unmatched "#if" or "#else".
+[#			Go to [count] previous unmatched "#if" or "#else".
 			|exclusive| motion.
 
 						*]#*
-]#			go to [count] next unmatched "#else" or "#endif".
+]#			Go to [count] next unmatched "#else" or "#endif".
 			|exclusive| motion.
 
 These two commands work in C programs that contain #if/#else/#endif
@@ -1300,11 +1306,11 @@ constructs.  It brings you to the start or end of the #if/#else/#endif where
 the current line is included.  You can then use "%" to go to the matching line.
 
 						*[star* *[/*
-[*  or  [/		go to [count] previous start of a C comment "/*".
+[*  or  [/		Go to [count] previous start of a C comment "/*".
 			|exclusive| motion.
 
 						*]star* *]/*
-]*  or  ]/		go to [count] next end of a C comment "*/".
+]*  or  ]/		Go to [count] next end of a C comment "*/".
 			|exclusive| motion.